Sign In Join 



Dodge Caravan/Chrysler Voyager

2361 messages,  Last post on Nov 18, 2009 at 1:15 PM

You are in the Chrysler/Plymouth Voyager, Dodge Caravan Forum. Your Host is Karens

What is this discussion about? Chrysler Voyager, Dodge Caravan, Dodge Grand Caravan, Chrysler Grand Voyager, Van


Messages Page 233 of 237
1
...
230
231
232
233
234
235
236
237
Prev
Next
Last
Go To Msg #
Search This Discussion

#2314 of 2361
'99 caravan motor/regulator issue by max46
Mar 04, 2008 (9:25 am)
Reply
I just installed an OEM regulator and motor for a 99 caravan.
the installation was clumsy, but its in and pretty clean looking.
Question. The motor is really slow in the up direction. Down travel is really fast.
Makes sense, but the motor is getting really hot.
I could wrap up the job, but I know the motor will fail if I leave it like this. Its a friends car and she has already put out $200 for each of the two front windows already.
It seems like the motor doesn't have the *alls to lift the window.
Any advice is welcome.
#2315 of 2361
transmission problems by als8
Mar 04, 2008 (4:01 pm)
Reply
my 98 caravan is not feeling well when i put it in drive and take off it makes a loud funny noise like a loud vibration or something like a clogged converter the noise will stop when it shifts into second then it seems ok i checked the fluid and it was pretty black.any ideas on what it could be im hoping something simple.id appreciate any help thank you
#2316 of 2361
Re: '99 caravan motor/regulator issue [max46] by shipo
Mar 04, 2008 (9:55 pm)
Reply

Replying to: max46 (Mar 04, 2008 9:25 am)

I recently did the same thing on our 1998 DGC (left side only) and have found the same thing as you even though I used a regulator from NAPA ($114 per side) instead of the factory unit. I decided to leave it in there and see how long it will last, and so far, so good, it's been about three months and even though it's slow, it keeps lifting the glass.
 
Best Regards,
Shipo
#2317 of 2361
black streaks after rains by vanhalen2000
Mar 23, 2008 (4:44 pm)
Reply
Does anyone know why this happens, and/or how to fix it? I have a 2000 Caravan, and after it rains I get very visible black streaks on the sides and back hatch. I washed and wax/polished the entire van. Still get black streaks. I even wax/polished the roof rack, some black residue did come off of the rack onto the paper towels but I think I got all the black residue off. I still get the streaking. Auughhh! And guess what, the van is white. I guess it's the roof rack and all other rubber/plastic window moulding/etc. that is deteriorating, but I don't know why it doesn't happen on everyone's vehicle. My van isn't new but 8 years old isn't that old. Is there anything I can do to fix it? It looks awful.
#2318 of 2361
starting by mellie3
Mar 24, 2008 (6:55 am)
Reply
when i start my 2000 plymouth voyager it makes a rattling noise.only happens when it sits for 2 hrs then starting it agian it makes the same noise.what could it be?
#2319 of 2361
Re: starting [mellie3] by shipo
Mar 24, 2008 (5:28 pm)
Reply

Replying to: mellie3 (Mar 24, 2008 6:55 am)

Assumption: Your 2000 Voyager has a 3.3 liter engine. Yes, no?
 
Could the "rattling" also be described as a clattering noise from the engine? If so you or your mechanic are/is probably using an oil filter that has a crappy Anti-Drainback Valve (not to be confused with a crappy filter as many high dollar filters have worthless ADVs). With our 1998 Caravan I've tried any number of filters over the years, and so far at least, the Motorcraft FL-1A filter (available at Walmart and Autozone, and I'm sure many other places) keeps the engine the quietest by a wide margin. In fact the "margin" is so wide that I've stopped trying other filters and will use NOTHING but the FL-1A.
 
If you decide to use the Motorcraft filter, do not be alarmed by its large size, Chrysler and Ford used filters built to the same specs for literally decades, and when Chrysler specified the smaller filter that came on our vans, they simply lopped the last couple of inches off of the large cannister filters, slapped a new model number on them and called it a day. That said, instead of adding five quarts following an oil change, now you'll need to add ~5.2 or 5.3 quarts to bring the oil up to the "Full" mark on the dipstick.
 
Keep us posted.
 
Best Regards,
Shipo
#2320 of 2361
Re: starting [shipo] by mellie3
Apr 04, 2008 (4:49 pm)
Reply

Replying to: shipo (Mar 24, 2008 5:28 pm)

yes it does.well i also have had a rebiult tranny within tha last month.noise is getting harder.just had a oil change its now more of a knocking.i thinks its a rod.help.any suggestions what to do.trade it in, try lucas oil, new engine.only when starting and press on the gas to take of.does not knock when idling.
#2321 of 2361
Re: starting [mellie3] by shipo
Apr 04, 2008 (7:51 pm)
Reply

Replying to: mellie3 (Apr 04, 2008 4:49 pm)

When you say the noise is "getting harder", does that mean that you hear it for more than a second or two following a cold start? If so then you might well have a bearing or other engine issue, however, if the noise is only apparent immediately following a cold start (as you stated in your first post), you should change your oil filter NOW to a Motorcraft FL-1A, no joke, this WILL solve your problem.
 
If you have a rod pounding, the noise will not subside in the least after an engine start, cold or hot, it will pound all of the time. Regarding Lucas oil additives, nope, if you truely have a problem, that stuff won't help (in fact, it won't help even if you don't have a problem).
 
Best Regards,
Shipo
#2322 of 2361
Re: starting [shipo] by mellie3
Apr 05, 2008 (11:11 am)
Reply

Replying to: shipo (Apr 04, 2008 7:51 pm)

see thats the thingit doesnt pound all the time just when started and now as u press on the gas until it shifts..when its stoped at a light its quiet.when in park its quiet.just when starting and sometimes when u press on the gas until it shifts.i just hadd oil changed.do u think if i by the new filter can they put it in for me?every answer will help me.i own the van and want to keep it for awhile.lol.what about a tune up.im saving up for it.2wks or less.
#2323 of 2361
Re: starting [mellie3] by shipo
Apr 05, 2008 (6:24 pm)
Reply

Replying to: mellie3 (Apr 05, 2008 11:11 am)

Hmmm, if the engine makes a mechanical pounding at anytime after the first few seconds following a cold start then you have a problem that an oil filter will not solve. Long story short, you need some engine work if that's the case, we're talking some serious dollars here.
 
Question: Did you ever run this engine low on oil at any point? Have you ever seen the oil pressure light illuminate?
 
Best Regards,
Shipo

Messages Page 233 of 237
1
...
230
231
232
233
234
235
236
237
Prev
Next
Last
Go To Msg #
Search This Discussion
To POST a message, please Sign In.

New? Join Now!

Forum Tools

Please sign in.
Email Address:

Password:

Forgot Password?

Search Forums

Enter Keyword(s)

Advanced Search

Browse by Vehicle



View All Vehicles
Advertisement
Ask the Community
See What People Are Asking

Browse by Board

Browse by Topic


View All Topics

Today's Chats

Advertisement