Edmunds.com | Inside Line | Auto Observer Your Account | Help | Directory
You are here:
![[F]](http://a332.g.akamai.net/f/332/936/12h/www.edmunds.com/media/townhall/webxicons/site.gif){kind=small}
Forums
Vans & Minivans Chevy Venture Chevy Venture
2457 messages, Last post on Nov 27, 2009 at 6:06 AM
You are in the Chevy Venture Forum. Your Host is Karens
|
Replying to: jeddry (Oct 15, 2008 7:24 am)
|
|
|
Replying to: 442dude (Oct 15, 2008 5:02 pm)
|
|
|
Replying to: jeddry (Oct 15, 2008 9:49 pm) 
|
|
|
I changed the hub, but I had to remove the drum brakes I can't seem to figure out exactly how to put them back. Any one have a diagram for a 2001 venture rear drum brakes???? ASAP Thanks again. |
|
|
Replying to: 442dude (Oct 16, 2008 2:01 pm) |
|
|
|
|
Let me know; I'll post one. FYI, I only take one side apart at a time so I can reference the one that's still together. Check your other side if you haven't taken it apart. -Tony
|
|
|
Tony, I did get it back together after referencing the other side. Just one other question, I also replaced the cylinder and a section of brake line. One finished I bled the one side only and when finished I still don't have any brake pedal, do I have to bleed all four tires or just the back two?
|
|
|
Replying to: tony17112acst (Oct 18, 2008 10:13 am) Working on my control arm bushings today, I can only get the horizontal bushing 3/4 of the way in, any suggestions???
|
|
| Working on my bushing today and I can only get the Horizontal bushing in 3/4 of the way. Any advise or suggestions on how to get it in the rest of the way????? | |
|
|
|
Replying to: jeddry (Oct 18, 2008 4:28 pm)
|
|
You are here:
Forums
Vans & Minivans Chevy Venture Chevy Venture
New? Join Now!
Forum Tools
Search Forums
Browse by Vehicle
2005 Chevrolet Venture
Browse by Board
Browse by Topic
Today's Chats
