You are here: Forums Vans & Minivans Chevy Venture Chevy Venture

Chevy Venture

2457 messages,  Last post on Nov 27, 2009 at 6:06 AM

You are in the Chevy Venture Forum. Your Host is Karens

What is this discussion about? Chevrolet Venture, Van

Messages Page 241 of 246 1 ... 238 239 240 241 242 243 244 ... 246 Prev Next Last

Go To Msg # Search This Discussion

#2398 of 2457 CONTROL ARM BUSHINGS by jeddry Sep 30, 2008 (8:42 pm)
Is this something I can change at home in the driveway or should the shop do it? Pretty handy but not sure on this one?
#2399 of 2457 STARTER PROBLEMS by jeddry Oct 02, 2008 (3:06 am)
Ever since I bought the starter it grinds when I start the van. Now it ticks and eventually it starts, Does this sound like the starter is going? If so is this difficult to change and can it be rebuilt or should I just replace it? Replies to this message: 442dude (Oct 02, 2008 4:06 pm)
#2400 of 2457 Re: 2003 Chevy Venture - Wont Start [qinael] by jeddry Oct 02, 2008 (3:13 am)
Replying to: qinael (Aug 27, 2008 1:13 pm) Did you have this looked at? What was the problem? I am having the same complaint.
#2401 of 2457 Re: STARTER PROBLEMS [jeddry] by 442dude Oct 02, 2008 (4:06 pm)
Replying to: jeddry (Oct 02, 2008 3:06 am) I've never done a starter on a Venture but I remember on my Celebrity, you had to check the backlash of the starter gear to flywheel (3.1 V6)...if the shims weren't right, it would grind. The starter came with a tool to measure the backlash and shims to correct it of needed.   If you determine that the starter needs to be replaced, don't bother trying to rebuild it, just replace it.
#2402 of 2457 REPLACING MY REAR HUB ASSEMBLY by jeddry Oct 15, 2008 (7:24 am)
Guys,   I just found out that my left rear hub assembly needs to be replaced. I have changed my front ones, is the rear ones harder? Any information or advise would be great.   Thanks again!! Replies to this message: 442dude (Oct 15, 2008 5:02 pm) jeddry (Oct 15, 2008 9:49 pm) 442dude (Oct 16, 2008 2:01 pm) and 1 more...
#2403 of 2457 Re: REPLACING MY REAR HUB ASSEMBLY [jeddry] by 442dude Oct 15, 2008 (5:02 pm)
Replying to: jeddry (Oct 15, 2008 7:24 am) If you did the front, the rear will be a snap in comparison. Same concept but IIRC, bolts on the front, you don't have to work from the back of it.. Replies to this message: jeddry (Oct 15, 2008 9:49 pm) 442dude (Oct 16, 2008 2:01 pm) jeddry (Oct 18, 2008 6:59 am)
#2404 of 2457 Re: REPLACING MY REAR HUB ASSEMBLY [442dude] by jeddry Oct 15, 2008 (9:49 pm)
Replying to: 442dude (Oct 15, 2008 5:02 pm) So you are comfortable in saying that he rear is much easier to change? i think I am going to give it a try. If I wanted to change my brakes at the same time would it be easier or is this something totally different? Replies to this message: 442dude (Oct 16, 2008 2:01 pm) jeddry (Oct 18, 2008 6:59 am)
#2405 of 2457 Re: REPLACING MY REAR HUB ASSEMBLY [jeddry] by 442dude Oct 16, 2008 (2:01 pm)
Replying to: jeddry (Oct 15, 2008 9:49 pm) While you've got it apart you might as well replace the brake shoes. You don't have to remove them (assuming you don't have disc brakes here) but its as good a time as any to do them. It really is easier than doing the fronts. Go for it. I'll keep my eyes here, if you run into a problem, give a yell.     Replies to this message: jeddry (Oct 18, 2008 6:59 am)
#2406 of 2457 Problems Putting the Brakes back together by jeddry Oct 18, 2008 (6:57 am)
I changed the hub, but I had to remove the drum brakes I can't seem to figure out exactly how to put them back. Any one have a diagram for a 2001 venture rear drum brakes???? ASAP   Thanks again.
#2407 of 2457 Re: REPLACING MY REAR HUB ASSEMBLY [442dude] by jeddry Oct 18, 2008 (6:59 am)
Replying to: 442dude (Oct 16, 2008 2:01 pm) NEED HELP!! Do you have a brake diagram???

Messages Page 241 of 246 1 ... 238 239 240 241 242 243 244 ... 246 Prev Next Last

Go To Msg # Search This Discussion

You are here: Forums Vans & Minivans Chevy Venture Chevy Venture