You are here:
Forums
Coupes & Convertibles
Mazda Miata
Mazda MX-5 Miata (2005 and earlier)

4340 messages, Last post on Aug 25, 2009 at 9:51 AM
You are in the Mazda Miata Forum. Your Host is claires
| My gas gauge never reads full, only goes to about 3/4 and stops. As I drive it starts to fall and will read correctly. when I fill up, I estimate how much it should take by the gauge reading and I am within 1/2 gallon of being right, so I am comfortable that it is reading correctly after it starts to fall. Any ideas??? Had my car now for almost a month!!!! '96 standard, 50k miles....geeez life is good!!! I am thinking of getting some braces for under the car and the engine bay and trunk. Will i be able to notice the difference in increased stiffness. Is it worth the money? | |
|
|
|
My rear window never leaked. The top pulled away from the bottom of the window a total of maybe 1.5-2" in length and then stopped. I don't think it pulled far enough down to cause a leak. It just spread horizontally. How much has pulled away on your window? I would definitely try putting clear silicon along the bottom of the entire window. Once that stuff sets, it's pretty sticky and should be able to handle the stress of putting the top up and down as well as keep the rain out. Just think, if it does work, you still got a cheap reasonable quality glass window top. Other then the inferior glue they used around the window, the top seems pretty good. However, I feel really bad that I ever sold the darn thing because it was never my intention to aggravate another good member on here. I'm sorry it's been a problem for you. I was hoping the first top was a fluke, but I guess that's not the case. Maybe you could email the company and ask them what they suggest to fix it, not to mention complain to them about the crap glue they are using! I no longer own the Miata as I have since sold it and then bought a 90 RX7 convertible to take its place (thankfully the top was replaced before I bought it and is of very high quality!). Good luck and let me know if the silicone stops the leak. |
|
|
I think they made the rear brace standard in '93 (I have it), and the front brace in '94. Yours might already have both. I'm talking on the under side. You can add the spring tower braces front and rear and expect incremental improvements. I have the front spring tower brace and a home-made brace on the under side of my '93. -juice |
|
|
No hard feelings towards you at all. Frankly, the price we agreed to is indicitive of the value of the top so I don't feel ripped off at all. I'm just having some trouble with it and I was wondering if you had the same trouble, and if so, what you ahd done that helped or hurt. That's all. I'll try the silicone solution and see how it goes. |
|
| Anyone had good luck with any cheapo seat covers? I'm thinking sub $40-50 range. Any more and I'll just take the time to reupholster them myself. My seats have some rips in them in of all places the very tops of the head rests. | |
|
Did you roll it at an autocross? :o) -juice |
|
| Nowhere around here has events...that I know of anyway. Honestly, I bought the car with the headrests ripped...really the only rough part of the interior. I have no idea how it happened to either one of them, much less both of them. | |
|
I knew that, I was just teasing. I wonder if you could get them reupholstered for cheap. Leather runs $900 for 5 seaters, so a 2 seater should run maybe $400-500. For cloth it should cost even less. Look in your phone book under Auto - Upholstery. Call them and ask. -juice |
|
|
Hi. Can someone email me a couple of Miata only websites/forums? I've googled for some and can't find any. tobympls Thanks! |
|
| In the Minneapolis area are discounted 5500-6000$ now, just an fyi. | |
You are here:
Forums
Coupes & Convertibles
Mazda Miata
Mazda MX-5 Miata (2005 and earlier)
New? Join Now!
Forum Tools
Search Forums
Browse by Vehicle
2005 Toyota MR2 Spyder
2010 Mazda MX-5 Miata



Browse by Board
Browse by Topic
Today's Chats