You are here:
Forums
Coupes & Convertibles
Mazda Miata
Mazda MX-5 Miata (2005 and earlier)

4340 messages, Last post on Aug 25, 2009 at 9:51 AM
You are in the Mazda Miata Forum. Your Host is claires
|
That's quite a list! I've been under the impression that I shouldn't have to worry about the tranny fluid with a manual. I've also been meaning to remove the tow hooks myself since I've got a grill waiting to be installed, but getting them to do it is probably easier. I'm not sure what the torque wheels are. |
|
|
actually manual transmission gear oil should be replaced every 30k or so. it's in your owner's manual. if you don't have one, I bet Mazda would send or sell you one. -Colin |
|
|
I meant torque the wheel lug nuts to specification. In other words, I don't just throw them back on and tighten them arbitrarily. -juice |
|
|
Thanks to everyone who answered my question about load capacity. I also contacted Mazda - their answer was that the 340 lb limit was for "optimal" performance, but exceeding it would not be a safety issue. Regards Ken |
|
| I know Miata's are known for this, but what is the fix for a '92? I can't remember if strut tower braces help or if there's something else that can be done. I know that a lot of ride and handling gizmos are available from mmmiata.com, but I don't want to waste money by ordering the wrong thing. Any help would be appreciated. | |
|
Check here for some insight http://www.miata.net/garage/65_mph.html |
|
|
|
|
Happy Easter to All! God Bless, Larry |
|
|
Spring is here, My hardtop is off! Happy Convertabling all (god or no god |
|
|
Check tire pressure. 26-28psi is best to avoid that shimmy. Mine was high and jiggled a lot at highway speeds, plus the CD would skip all the time. It's much better now. I also added a front lower brace that I made myself from C-Channel steel and some zinc coated bolts. Check miata.net, there were instructions on how-to. Or you can just buy a custom brace for $30-38 or so. It bolts on easily. -juice |
|
| Juice - Thanks for the input. I have been carrying more air pressure, so I'll try lowering it to 26-28 psi and see what happens. The brace sounds like a "what can it hurt?" deal, so I'll probably order one of them too. | |
You are here:
Forums
Coupes & Convertibles
Mazda Miata
Mazda MX-5 Miata (2005 and earlier)
New? Join Now!
Forum Tools
Search Forums
Browse by Vehicle
2005 Toyota MR2 Spyder
2010 Mazda MX-5 Miata



Browse by Board
Browse by Topic